DENOMINATION: EM 3800 “MILPAC” 25% GLOSS HIGH COV. P.U.FINISH
EM 3801 “MILPAC” 35% GLOSS HIGH COV. P.U.FINISH
EM 3802 “MILPAC” 40% GLOSS HIGH COV. P.U.FINISH
EM C 15 HARDENER AT 50%
EM C 6 NON YELLOWING HARDENER AT 50%
It is a P/U finishes set endowed with very high coverage and softness, particularly suitable for fast working cycles (1 coat basecoat + 1 coat finish)
|VISCOSITY FC Æ 4 at 20°C.||50”||50”||50”|
|DENSITY at 20°C.||.99||.99||.99|
|POT-LIFE at 20°C.||over 4 hs.||over 4 hs.||over 4 hs.|
|GLOSS LEVEL at 60°||25%||35%||40%|
|PENCIL HARDENESS||2 H||2 H||2 H|
By spray or curtain after sanding on substrates previously covered by P/U or P/E basecoats. Spray by traditional or airmix spray guns. Application by airless pumps is not advisable. Before use it is necessary to reduce by EM 754 THINNER FOR P.U. VARNISHES at 10-20%.
Curtain application is possible by traditional (not “open sky”) curtain coaters; it is necessary to reduce at 10- 20% before application.
Average yield is about 5-6 smt/lt for spray application and 6-7 smt/lt for curtain application. The best working cycle for this set of product which enhances their coverage quality is by applying 140-160 cc/smt over a single coat of P.U. basecoat to finish doors or panels. The result which can be obtained is very good and working cycle is very fast.
DRYING at 20°C.:
DUST FREE : 15-20’
TOUCH FREE : 2-3 hs.
DEEP DRY : over 24 hs.
STACKING : over 10 hs. room temperature, 140 cc/smt
EMPLOYMENTS AND WARNINGS:
As a top coat for furniture and panels. When applied in hot climates it is advisable to add EM 755 RETARDANT THINNER at 5%.
To have a best result, apply the products in temperature condition between 10 and 30°C. Do not use these products on items outdoor exposed