Fast clear coat (989 S) is high glossy and high quality.
Use thinner 7021 to clean the equipment and spraying gun
You need to make sure to wear protecting stuff during spraying.
shake or stir thoroughly. Mix by volume: 2:1
Clear 989:289 Hardener
Spray viscosity: 18-22 sec DIN CUP #4@25c.
After Sanding Primer, scuff any blend areas & clean according to direction. Apply base coat per instruction and allow to fully flash dry.
Set air pressure to 8-10 psi at the cap for HVLP equipment.
Use a spray gun equipped with a 1.3-1.4 fluid nozzle.
Spray tow full coats, allowing 5-15 minutes between coats.
Dry and cure time are dependent on several factors including temperature, air-flow, film build, and humidity.
Irritating to eyes and skin.
Keep away from sources of ignition.
No smoking during usage.
Do not breath vapors.
Wear suitable equipment if ventilation is not sufficient.
Before using carefully read health and safety information on label.
Product Status: Available