70% Maleic in Xylene / Aromatic (HPM120X70)

The resin is available as a 70% solid solution in an aromatic solvent. Using this product in the final products results in high gloss and good hardness of the coating. Due to the high solids content in the solution, the drying rate is increased. This product hardens the coating when mixed with dry alkyd resins

Quick info

Description

Short Introduction:

The resin is available as a 70% solid solution in an aromatic solvent. Using this product in the final products results in high gloss and good hardness of the coating. Due to the high solids content in the solution, the drying rate is increased. This product hardens the coating when mixed with dry alkyd resins

Product Status: Available

General Information

 

The resin is available as a 70% solid solution in an aromatic solvent. Using this product in the final products results in high gloss and good hardness of the coating. Due to the high solids content in the solution, the drying rate is increased. This product hardens the coating when mixed with dry alkyd resins

 

 

Application:

 

It is used in the production of sealer, clear, instant putty, cellulose paints, acid catalytic coatings, traffic paints, etc.

Technical Details

 

Viscosity 70% solution in xylene / 70-90 stoke
Solid Content 70±2
Acid Value (mg. KOH/gr of solid resin) Max. 35
Gardner Max. 8
Solvent Xylene
Softening point 120ºC˂

 

 

The above instruction is based on the technical experiences of our specialists. Therefore, under different circumstances, the buyer or user is responsible for reviewing and adapting the product to specific requirements.