This coating contains binder alkydamine (polyester modifiers), which is recommended for working on metal and non-ferrous surfaces exposed to heat and humidity conditions.
Product Status: Available
· How to use: Pistol
· Surface: The surface should be free of any dust, moisture, grease and extra particles.
· Temperature Condition: 25 ° C
· Theoretical coating power: 10 m² / lit for 38 microns (dry film)
· Stoving Temperature: 140-160 ° C for 20 minutes
Adequate ventilation is recommended to have conditioned air and using filtered face mask.
Wear non-impervious disposable gloves for hand protection.
Wear safety glasses to protect your eyes.
Stoving temperature: 150 degrees Celsius
Stoving time:20 minutes
Viscosity: 65 seconds
Solid content: 60%
Density: 1/1 g / cm3
Impact (inches per pound): 25 indirect
Flexibility (mandrel):180 degrees without cracking
Adhesion (cross cutting):100%
Glossy (60 ° angle):85%